WW Components, Inc.

Contact Fingers

2011-12-14T19:09:00.000-08:00

No Load Tap Changer Parts

2011-09-30T12:43:00.000-07:00

A set of no load tap changer parts made from original OEM samples.

Westinghouse DHP Movable Contacts

2011-09-20T12:29:00.000-07:00

Westinghouse DHP movable contact assembly with right and left hand side blades and center arcing contact. When we repaired these contacts, we replaced the damaged red shields.

ITE KS OCB Finger Cluster

2011-09-14T10:00:00.000-07:00

ITE Oil Circuit Breaker Finger cluster. This is one of six clusters (along with six movable rods) that we recently repaired. We also made the corresponding baffle stacks using phenolic.

McGraw Edison 550BLS

2011-09-12T12:26:00.000-07:00

Repaired McGraw Edison 550 BLS Contacts. We can repair or manufacture contacts from the 550B and 550C series. Call for a quote today!

Siemens Size 7 Motor Starters

2011-06-21T07:15:00.000-07:00

A three-pole set of Siemens Size 7 Contacts (49KZ750). We can repair these and other motor starter electrical contacts!

Westinghouse DR and DH Arcing Contacts

2011-03-25T08:26:00.000-07:00

Westinghouse DH(left) and DR(right) arcing contacts we just repaired! We can repair all the contacts from the various types of DH and DR breakers. Use the contact information on the sidebar or visit our main site: www.WWComponents.net.

Westinghouse OCB Contact Stabs

2011-03-23T08:24:00.000-07:00

A set of Westinghouse 34.5 contact stabs we recently manufactured based on the customer's burned up sample. We used brand new round stock copper and the proper contact tip material to create these pieces. We can also repair stabs such as these. Call for a quote on the repair or manufacture of electrical contacts today: 205-221-3093.

General Electric SE-100S Blades

2011-03-21T08:22:00.000-07:00

General Electric SE-100S Arcing (flicker) Blades. We can repair and manufacture these to OEM specs.

Westinghouse DH250 Finger Clusters

2011-03-17T10:04:00.003-07:00

Recently re-silvered finger clusters from Westinghouse DH breakers.

ITE HV-150 Movable Main Contacts

2011-02-28T14:03:00.000-08:00

A set of three ITE HV-150 Movable Main contacts re-tipped at our facility using silver tungsten.

Westinghouse OCB Stationary Contacts

2011-02-22T08:52:00.000-08:00

A group of Westinghouse OCB stationary contacts. We just completed making a large batch of these. We can also manufacture and repair the movable double stabs and arcing horns.

Westinghouse B20 Arcing Contacts

2011-02-11T06:47:00.000-08:00

Westinghouse B20 Movable Arcing Contacts made from an original OEM sample.

General Electric AL Arcing Contacts

2011-02-10T11:46:00.001-08:00

General Electric AL Arcing Contacts recently repaired at our shop.

Sylvania Size 6 Motor Starters

2011-01-27T11:53:00.000-08:00

A set of Sylvania Size 6 motor starter contacts we made based on OEM samples, complete with appropriate tip material and silver plated.

Contact and Bus Work

2011-01-25T11:54:00.001-08:00

Here is a set of contacts we made and silver plated based on the customer's samples. In each photo, the original OEM sample is shown along with our brand new parts...

Telescoping Isolators

2010-11-22T08:15:00.000-08:00

Here's an assortments of parts we made for a Telescoping Isolator; movable contact and upper contact units. Customer sent in the samples and we were able to make new ones shown.

Westinghouse OCB Movable and Stationary Contacts

2010-11-17T06:30:00.000-08:00

Multiple stationary and movable contacts repaired from a Westinghouse OCB breaker.

Westinghouse DH250 Electrical Contacts

2010-09-23T08:00:00.001-07:00

Here's a batch of Westinghouse DH-250 arcing contacts we recently repaired....

Westinghouse Size 4 Electrical contacts

2010-09-01T13:46:00.000-07:00

Besides air circuit and oil circuit breaker contacts, we also repair motor starter contacts. Here are some we just completed -- Westinghouse size 4 electrical contacts.

Westinghouse 50DH150-E Contacts

2010-08-30T13:37:00.000-07:00

Here's a set of Westinghouse 50HD150-E electrical contacts we recently repaired. See our contact information to the right and see what we can do for you.

Assorted Contacts

2010-08-27T10:23:00.000-07:00

Assorted contacts with braided shunts, complete with silver tungsten tips.

Siemens Allis LA-600 Arcing Contacts

2010-06-29T07:18:00.000-07:00

Siemens Allis LA-600 Movable and Stationary Arcing contacts.

General Electric MC-6A Electrical Contacts

2010-06-28T11:47:00.000-07:00

Recently repaired General Electric MC-6A Electrical Contacts.

Siemens Allis OCB 34.5 Electrical Contacts

2010-06-21T08:50:00.000-07:00

Here are stationary contact finger clusters and movable contact that were repaired for a Siemens Allis 34.5 oil circuit breaker. We can repair these are make new ones using copper, brass and copper tungsten.

Westinghouse AH-31 Electrical Contacts

2010-03-25T08:02:00.001-07:00

Below are some parts we recently made for a Westinghouse AH-31 High Voltage Contactor. Shown are some movable and stationary contacts as well as two main contact supports which were machined using the customer's sample.

Westinghouse DB-50 Electrical Contacts

2010-01-22T13:25:00.000-08:00

Recently repaired Westinghouse DB-50 main and arcing Electrical Contacts.

Westinghouse LF-50-H-430 Electrical Contacts

2010-01-20T13:07:00.000-08:00

One of our most common jobs involves repairing Westinghouse LF electrical contacts. However, in some cases a customer may want extras made. Here are a few pieces from a large order we recently completed where we made the LF contacts from copper and appropriate silver pads.

Allen-Bradley Motor Starter Electrical Contacts

2010-01-19T13:29:00.000-08:00

Recently repaired Allen-Bradley size 5 (Z34043) Motor Starter Electrical Contacts. These parts came in with the tips all burned up. We replaced the old pads with brand new contact material. They're as good as new, if not better, and the customer didn't have to pay high prices for new contacts.

Westinghouse 50-DH-205-D

2010-01-07T11:50:00.000-08:00

We can repair the contacts from various Westinghouse DH breakers. Below are some movable arcing, stationary arcing, and stationary mains from a Westinghouse 50-DH-205-D.

Pringle Swithces

2009-12-30T10:55:00.001-08:00

Below are some components of a Pringle Switch we recently refurbished. There was very little arcing on the makeup portions, but the pivots were in bad shape from mechanical wear. The customer sent in the effected parts to be serviced. We disassembled the movable and stationary bolt up areas, cleaned and filled all the gouged portions, and then silver plated all the copper. The resulting pieces were the same, if not better than brand new parts.

Give us a call to see what we can do for you!

ITE KCS Electrical Contacts

2009-12-15T12:01:00.000-08:00

An assortment of electrical contacts from an ITE KSC air circuit breaker.

GE Magne Blast AM 4.16-75-0 Electrical Contacts

2009-12-14T13:42:00.001-08:00

Newly repaired electrical contacts from a General Electric Magne Blast AM 4.16-75-0 Circuit Breaker. Use the contact information on the right of the screen to see what we can do for you!

Isolating Switches

2009-12-11T05:30:00.000-08:00

Here are stationary and movable contacts to what the customer identified as an Isolating Switches. All the burned up areas were repaired and given silver plating.

Westinghouse Air circuit Breaker Electrical Contacts

2009-11-09T13:44:00.000-08:00

These W/H ACB Stationary and Movable Contacts are tipped with silver tungsten pads.

ITE 5HV-250 Electrical Contacts

2009-11-06T10:37:00.000-08:00

Recently repaired ITE 5HV-250 Stationary Main Contacts.

General Electric Electrical Contacts

2009-11-05T10:34:00.000-08:00

These General Electric Contact Set were repaired with Silver Tungsten Tips.

GE Magne Blast Movable Arcing Electrical Contacts

2009-11-04T06:42:00.000-08:00

Recently repaired movable arcing electrical contacts are from a General Electric Magne Blast circuit breaker.

Electrical Contacts for an AKR-30

2009-11-02T11:56:00.000-08:00

Here is a sampling of General Electric electrical contacts from an AKR-30. Movable contacts, stationary contacts and the inner and outer pivots were repaired and silver plated. Check out our main site to see what we can do for you!

Siemens LA 25 Movable Contacts

2009-10-30T12:52:00.000-07:00

These are off a siemens LA-25 Breaker. They are the movable contacts and were repaired with silver tungsten.

Electrical Contacts from a Diverter Switch

2009-10-26T10:30:00.000-07:00

Here we have four different styles of contacts from a Diverter Switch we made in shop -- complete with contact pads and silver plated. The customer was basically a "middle man" who didn't know exactly who the OEM was. He sent in a sample of each style and we made these based on his samples.

GE AKR Stationary Arcing and ALF Upper Field Electrical Contacts

2009-10-19T12:55:00.000-07:00

We repaired twelve GE AKR Stationary Arcing Contacts (five LHS, five RHS, and two centers) as well as one GE ALF Upper Field Contact Stud with appropriate contact tip material. Give us a call to see what we can do for you in repairing burned up electrical contacts!

General Electric Motor Starters

2009-10-16T13:56:00.000-07:00

Recently repaired General Electric Size 7 Motor Starters

Tap Changer Electrical Contacts

2009-10-15T13:46:00.000-07:00

Below are some parts from two different tap changers. The basic hardware with the bolts could be reused, but the blades themselves were too badly burned. We replaced the copper blades with new versions which were cut to the OEM specifications. We also silver plated all the parts in shop.

General Electric Limit Amp Electrical Contacts

2009-10-14T13:36:00.000-07:00

We can repair and manufacture various GE Limit Amp Electrical Contacts. Shown is one of the most common, OEM part number 167A9956G1.

Mallory 8CC Electrical Contacts

2009-10-13T13:28:00.000-07:00

Here are some movable and stationary Mallory 8CC Electrical Contacts. We often repair these complete with silver plating. The particular set seen here was used in Lexington Fire Pump, circa 1948. The customer sent them in thinking we would have to make brand new ones based on the old burned up parts. While we could have made new versions, the older parts were salvageable. This resulted in a faster turn around time and saved the customer money.

The first shot is how the contacts looked when they came to WW Components, and the second shot shows the exact same contacts after we refurbished them.

Mallory 8CC Electrical Contacts -- before.
Mallory 8CC Electrical Contacts -- after!

Siemens 456D Electrical Contacts

2009-10-12T13:53:00.000-07:00

Recently repaired Siemens 456D Electrical Contacts

General Electric FKD Contact Set

2009-09-25T06:58:00.001-07:00

This is one of the most common types of contacts we work on; the electrical contacts from a General Electric FKD oil circuit breaker. The set above is how they generally come in to our shop. Thirty-six stationary contacts and six small arcing contacts in their aluminum housings and six movable rods make up the set. We completely disassemble, repair the contacts with the proper silver tungsten, and reassemble so they're ready for instillation. Below are the same contacts after we repaired them...

General Electric FKD Stationary Contact Assemblies
General Electric FKD Movable Contact Rods

Allis Chalmers BZ-40-A Contacts

2009-09-23T11:29:00.000-07:00

Here are some contacts from a set of Allis Chalmers BZ-40-A Oil Circuit Breaker we repaired. The pads on the stationary double contact were burned up. We upgraded from plain copper to the appropriate tungsten contact. The movable rods were also in bad shape, but after our repairs, they look brand new. With the proper contact material, they will even operate better than before! Check out the contact info to the right and call us to see what we can do for you!

Federal Pacific OCB Shoe Contacts

2009-09-22T08:34:00.000-07:00

An assortment of Federal Pacific OCB Contacts a.k.a. "shoe contacts". We can manufacture and repair various styles of these contacts. The one front and center is FB-4461, an example from a FP Model #RHE-78-115-10000. Check out the contact information to the right and call or email for a quote today!

General Electric FH-209 Brass Contact Assemblies

2009-09-11T11:42:00.000-07:00

Here are three examples of General Electric FH-209 Brass Contact Assemblies we made using brass and copper layered shunts. Everything you see in the photo came from our shop -- completely assembled and ready for the customer.

Westinghouse Size 5 Motor Starters

2009-09-10T11:44:00.000-07:00

This is rather common job for us at WW Components; repair of the Westinghouse Size 5 Motor Starter contacts. These often arrive with burned up round pads, but we put on brand new silver tungsten pads with the proper contours. Check out our contact information to the right and give us a call!

Cutler Hammer Size 3 (6-43-6) Three-pole set of electrical contacts

2009-09-03T14:20:00.000-07:00

These Cutler Hammer contacts were repaired with silver tungsten pads and silver plated.

Westinghouse DS-416 Arcing Contacts

2009-09-03T09:15:00.000-07:00

This is for a Westinghouse DS-416 Circuit breaker. We have three movable arcing contacts and three right-hand and three left-hand stationary arcing contacts. They all have silver tungsten pads and are silver plated. We can repair the contacts from all of the various Westinghouse DS types.

Allen-Bradley 100-Line Motor Starter Contacts

2009-09-02T13:44:00.000-07:00

This is a Three-pole set of Allen Bradley 100-Line Motor Starter contacts. They were repaired with silver tungsten pads and silver plated.

GE AK-2-25 Electrical contacts

2009-09-01T11:59:00.001-07:00

We manufactured these for a GE AK-2-25 Electrical circuit breaker. Three movable assemblies and six right-hand and six left hand stationary contacts. The pads are silver tungsten.

GE AK-2-25 Movable Assemblies and Stationary Electrical contacts

2009-09-01T11:59:00.000-07:00

Siemens SDO Electrical Contacts

2009-08-26T11:21:00.000-07:00

Two sets of Siemens SDO Oil Circuit Breaker electrical contacts repaired with brand new pads and silver plated.

Furnas Size 5 motor starter electrical contacts

2009-08-25T06:59:00.000-07:00

Furnas size 5 (75KB14 )Motor Starter contacts. We can repair different sizes and OEM motor starter contacts from size 0 all the way up to size 9 and everything in between! Check out our main website on more of our services!

ITE K-1600 Movable Arcing Electrical Contacts

2009-08-19T12:00:00.000-07:00

Three Movable Arcing Contacts repaired with Silver Tungsten pads.

GE Magne Blast AM-4.16 Movable Arcing Electrical Contacts

2009-08-18T10:52:00.001-07:00

These GE AM-4.16-350 Movable Arcing Contacts were repaired with Silver Tungsten pads and then Silver Plated.

GE Magne Blast AM-4.16 Electrical Contacts

2009-08-17T11:55:00.000-07:00

Three Movable Arcing contacts from a GE Magne Blast AM-4.16-250 breaker repaired with Silver Tungsten pads.

Stationary Switch Electrical Contacts

2009-08-14T11:40:00.000-07:00

Three spring loaded stationary contacts for a USCO switch. We repaired the burned up area and silver plated the copper.

Hubbell DC Electrical Contacts

2009-08-13T12:18:00.000-07:00

A set of Hubbell DC Contactor contacts with brand new pads. Check out our contact information to the right and see what we can do for you.

K-600 Movable Arcing Electrical Contacts

2009-08-11T11:41:00.000-07:00

ITE K-600 Movable Arcing Electrical Contacts. We can repair all of the K-600 contacts, but the movable arcing is the most requested. Check out our website to see what we can do for you.

Magne Blast Main Electrical Contacts

2009-08-10T08:14:00.000-07:00

Twelve newly repaired GE Magne Blast movable main electrical contacts. We can refurbish the different Magne Blast contacts from various breaker types. Check out our main website on more of our services!

MA-350C Electrical Contacts

2009-08-07T10:46:00.000-07:00

Here is a set of Siemens MA-350C Arcing Contacts that we recently repaired with brand new pads - three left hand movable arcing, three right hand movable arcing, and three stationary arcing. Check out our website to see what we can do for you.

IC7162 Limitamp Controllers

2009-07-22T12:06:00.000-07:00

Some before and after shots of a set of GE IC7162 Limitamp Controllers GEH-3065 we recently refurbished. We repaired the old copper make up areas with silver tungsten pads. Check our our site: WWComponents.net to see what we can do for you!

ITE HK Contact Set

2009-06-23T08:12:00.000-07:00

A portion of ITE HK Contacts we recently repaired. See the information on the sidebar to call for a quote today on repairing YOUR electrical contacts!

AKR10D-50H Electrical Contacts

2009-06-08T13:21:00.000-07:00

Here's a group of contacts from a set of General Electric AKR-10D-50H. All contacts were given brand new pads. After they were plated and cleaned up, they looked and worked like a brand new set!

Westinghouse DBF-40 Arcing Contacts

2009-05-28T10:36:00.000-07:00

Here are some Westinghouse DBF-40 stationary and movable arcing contacts we recently repaired. They came in with bad pitting all along the makeup areas. We removed the old pads and replaced them with brand new contact material.

Cutler Hammer Contacts

2009-03-20T13:18:00.000-07:00

Here are some Culter Hammer upper and lower stationary main contacts attached to a phenolic board along with the movable contacts with studs. These normally arrive with small circular pads as the contact points. We can repair these with full surface pads on the stationary contacts.

GM-7S Stationary Contact

2009-03-09T13:48:00.000-07:00

Here is part of a Westinghouse GM-7S Stationary Contact. We repaired a whole set of these along with the movable stabs recently. The contact tips were replaced and all the hardware was cleaned up. The finished assemblies looked and operated as brand new products.

USCO Switch Repair

2009-03-06T12:26:00.000-08:00

Below are before and after shots of a USCO HH6 600 AMP switch. We repair these as well as 1200 AMP versions for various customers. If the copper blades are too burned up, we can make new ones and reuse the cast hardware. We also do our own silver plating using 99.9% pure silver.

FPE Finger Cluster

2009-03-04T21:08:00.000-08:00

Federal Pacific Finger Cluster. We can resilver and repair your FPE Finger clusters as well as clusters from other OEMs. Be sure to visit our site: wwcomponents.net

GE LG-218 Disconnect Switch Assembly

2009-02-25T13:12:00.000-08:00

We mostly do electrical contact repair work here at WW Components, but every once in a while, we get RFQ's on parts that are beyond repair. In some cases, the repair work would be too involved and it becomes less expensive and faster to make new parts from scratch. Such was the case with a recent job we did with a GE LG-218 Disconnect Switch. It was made out of copper with brass and phosphorus bronze hardware. Below are some pictures of the customer's part and the ones we made.

This is the customer's burned up part that was sent in as a sample. The makeup area was completely burned and the silver pivots on the back were ruined from mechanical wear.

A closeup shot of the damaged makeup area.

Here's one of our newly made parts using copper and silver.

Makeup area detail of a new part.

All six new switches ready to be shipped to the customer for instillation.